Mopar 68191349AC (MO-349) is the cartridge oil filter for the 3.6 Pentastar's flat-bottom filter housing. It includes the O-ring. It's the most-bought part on this list, and the most common mistake is putting the wrong style of filter in an early 2012–2013 JK, or the old style into a housing that's been converted.

Fitment

2014–2018 JK 3.6 and 2018-and-later JL/Gladiator 3.6, per Mopar dealer listings. 2012–2013 JKs use the nipple-style MO-744 unless the housing was converted. Always confirm the number on your old part or run your VIN at a Mopar parts counter before you order.

Common failure symptoms

Cross-reference

BrandPart numberNotesSource
Mopar68191349AC / MO-349Flat-bottom cartridge with O-ring.source
WIXWL10010Equivalent cartridge, as used in our oil cooler guide.source
Mopar (2012–2013)MO-744Nipple-style filter for unconverted early housings.source

Rebuild, repair or replace?

Filters are single-use, so replace one at every oil change. Use the new O-ring and torque the cap to 18 ft-lbs (our oil cooler guide has the source). Over-tightening is how the plastic housings crack. If a 2012–2013 JK had its housing replaced with the 2014+ design (Dorman 926-959 or the latest Mopar), use this filter from then on and throw out any nipple-style filters.

Where to buy

As an Amazon Associate we earn from qualifying purchases. Confirm fitment with Amazon's garage tool. See our disclosure.

FAQ

Does it fit a 2012 JK?

Only if the oil filter housing has been converted to the 2014+ design. Otherwise use MO-744.

Does the JL use the same filter?

Yes, Mopar lists 68191349AC for the JL 3.6.

What torque on the cap?

18 ft-lbs.

Related guides

Sources

Part numbers and fitment were checked against the sources above on October 22, 2026. Mopar supersedes numbers over time. If a newer letter suffix shows up, it generally replaces the one listed here. Back to the parts lookup.